Need Help! toolpath alternative needed!!!


Results 1 to 9 of 9

Thread: toolpath alternative needed!!!

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default toolpath alternative needed!!!

    hello everyone,
    this is my first post onto here hoping I might find some help with my current issue. I regularly run 2 different axyz 4008 (circa 2000 and 1998) both with amc0004g controller boards The problem that I'm having is with my current version of toolpath its the last version available for my machines without upgrading the boards inside my machines, and im looking for either an alternative to toolpath that works a bit better or a cheaper controller board upgrade then what axyz offers. toolpath is just doesnt fit my needs when it comes to the more detailed shapes i use it to cut. I would like to find a program that can run easily on my machines that can also take the place of enroute and toolpath. any suggestions you guys have on the matter would be greatly appreciated thank you and have a nice day


    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    You might try Fusion 360, will replace both Enroute and Toolpath. It's free to small businesses and hobby users. They have a post processor for axyz, but I don't know if it's compatible with your boards, but can be modified to output what is needed.

    The other option is to just do a full controls upgrade, there are a lot of options available, but I don't know how the cost would compare to just upgrading your boards from axyz.



  3. #3
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    I believe that "Toolpath" is the name of the control software. So Fusion 360 will NOT replace it.

    There are a lot of options in new control software, but I would expect that all will require you to replace some electronics, as I don't know if anything else will work with your electronics.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    Quote Originally Posted by ger21 View Post
    I believe that "Toolpath" is the name of the control software. So Fusion 360 will NOT replace it.
    Glad you caught that, thanks Gerry.



  5. #5
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    thanks for your responses. yes, toolpath is the program and I'm ok with changing out some components to get a better program working on it. but then my next question would be what are some decently priced options for a hardware upgrade for my machines because I really don't want to buy everything brand new from axyz



  6. #6
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    Does it use stepper motors, or servos? If servos, are they analog, or do they take step and direction signals?

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #7
    Registered
    Join Date
    Apr 2017
    Location
    United States
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    both of them are stepper motors.



  8. #8
    Registered
    Join Date
    Aug 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    Hi there
    I am interested to hear how you got on? did you install a new control board?



  9. #9
    Member
    Join Date
    Jun 2015
    Location
    Australia
    Posts
    68
    Downloads
    2
    Uploads
    0

    Default Re: toolpath alternative needed!!!

    Quote Originally Posted by Macwood View Post
    Hi there
    I am interested to hear how you got on? did you install a new control board?
    What would you like to know as I am a trained technician specialising in AXYZ controllers



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

toolpath alternative needed!!!

toolpath alternative needed!!!