Try using Feedhold before stop. You should never hit Stop while the machine is running, without feedholding first.
Sudden axis movement or maybe motor break when htting MACH3 stop button, My workaround on this is to jog a little of any of the axis then I can prevent this issue from happening. Anyone? Please help me
Similar Threads:
Try using Feedhold before stop. You should never hit Stop while the machine is running, without feedholding first.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry, Is this Normal behaviour?
No. But if the machine has a motion controller, it could be the motion controller that's causing it.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)