F means your feedrate is 20 units/min.
The 100% below the F is your current feedrate override setting. 100% of 20 = 20
If you increase the override to 150%, you'll see the FRO DRO show 30.
F means your feedrate is 20 units/min.
The 100% below the F is your current feedrate override setting. 100% of 20 = 20
If you increase the override to 150%, you'll see the FRO DRO show 30.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Got, it thank you. FRO = Feed Rate Override.