Need Help! axis change


Results 1 to 2 of 2

Thread: axis change

  1. #1
    Member
    Join Date
    Apr 2011
    Location
    U.S.A
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default axis change

    Have Mach 4 latest build Lathe , I need to change Z axis to X axis , because my Bobcad v 29 lathe does not write the gcode to the correct axis , for my machine . I have talked to Bobcad for a week , no results . Need help

    Similar Threads:


  2. #2
    Member CS900's Avatar
    Join Date
    Aug 2006
    Location
    USA
    Posts
    670
    Downloads
    0
    Uploads
    0

    Default Re: axis change

    you should be able to configure your post processor in bobcad to switch the axis. I assume you're using the Z axis the rotational axis of the lathe, and X for the cross slide?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

axis change

axis change