So I am am new to the cnc world and I am so confused... I have had a post processor made to make my parts from Micheal with dolphin... I upload it in mach 3 on my machine and it seems that I can not get things to line up... I have set all my tool offsets on mach 3 and a cording to dolphin everything is at 0 also.. but when I run a part everything is off... tool 1 is in the right place but my part isn't close to the correct measurement... tool 2 is a peak drill and it works but 0 is off.. and them tool 3 isn't even close... I hope this isn't 2 confusing but something isn't right... can someone help<br />
<br />
Sent from my SM-N920V using Tapatalk

Sent from my SM-N920V using Tapatalk

Similar Threads: