Another limit switch question


Results 1 to 1 of 1

Thread: Another limit switch question

  1. #1
    Registered
    Join Date
    Jan 2016
    Posts
    10
    Downloads
    0
    Uploads
    0

    Question Another limit switch question

    Hi guys

    Im experienced some issue with my CNC,
    thats a Chinese machine controlled by a Gecko G540 and Mach4 (using Darwin plugin) .

    Im experienced 2 issues:
    1. My axis wont automatically stops when i press the limit/ homing switches while moving or jogging.
    Each limit configured to trigger the ++ limit, -- limit and Home (confirmed by the diagnostics tab wiring is OK)
    Also- if i press the limit switch while IDLE and then try to jog- then i get the error message of "Limit switch tripped".

    2. "Ref all home" wont move any of the axis.

    what should i configure in order to resolve the issues and make things work work properly?

    Similar Threads:
    Last edited by kfir762; 06-27-2017 at 05:06 AM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Another limit switch question

Another limit switch question