Need Help! Machtric S800E Mach4 Modbus configuration


Results 1 to 3 of 3

Thread: Machtric S800E Mach4 Modbus configuration

  1. #1
    Member
    Join Date
    Sep 2016
    Location
    Sweden
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Machtric S800E Mach4 Modbus configuration

    Hello guys I'm totally lost..
    I've posted a similar thread before about this , and that was for Mach3 and got it working with a lot of help from the guys in the other thread,

    As I've decided to switch from Mach3 to Mach4,
    Do get rid of the old dying parallel port, A new problem have showed up, probably not just one,

    I have very little experience with modbus, very very basic knowledge and nothing more and I really need some help to either understand, or to get it working,

    I got the numbers hex/Deci,s registers and so on, but I don't know what to do with them?

    There is no test modbus feature in Mach 4 that could help me determine the functionality of the settings,

    And how to bind them to the spindle start/stop/freq buttons in the software?

    Lua script/plc editor? Way out of my comfort zone,

    I want to learn but then life happened.. don't often find moments to research and learn,

    And my English isn't the best as you guys probably have noticed Machtric S800E Mach4 Modbus configuration

    Thanks.



    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2013
    Location
    Sweden
    Posts
    1899
    Downloads
    2
    Uploads
    0

    Default Re: Machtric S800E Mach4 Modbus configuration

    Good luck. I can't help you with Mach4, but I think you should have posted this question under Mach4 software, if there is a specific thread for that.

    https://www.youtube.com/c/AdaptingCamera/videos
    https://adapting-camera.blogspot.com


  3. #3
    Member
    Join Date
    Sep 2016
    Location
    Sweden
    Posts
    50
    Downloads
    0
    Uploads
    0

    Default Re: Machtric S800E Mach4 Modbus configuration

    Maybe i should have done that instead, I'll see if anyone answers,
    Otherwise I'll have to sit down and learn everything (Modbus, Lua) just don't got the time for studying, even if I want to.

    Or control the spindle via 0-10v and skip modbus,



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Machtric S800E Mach4 Modbus configuration

Machtric S800E Mach4 Modbus configuration