key chain demos

[woodman08]

[nomedia="http://www.youtube.com/watch?v=RVSU299Rg9c"]YouTube - ‪making an acylic keychain part 1 video demo‬‏[/nomedia] laser cut keychain
right from selecting or design it yourself i sized the design and programmed the engrave and final cut,
this can be done in one step but i prefer 2 steps ,job took about 4-5 min ,programming and design might be
longer for the initial one
Just a small reminder when you download the file to the laser double check all paramaters were loaded and
then a final check you will see the file name on the machine displa


[nomedia="http://www.youtube.com/watch?v=BDuEHf8nWcc"]YouTube - ‪lasering an arborite keychain demo part2‬‏[/nomedia] arborite key chain
the arborite keychain was similar to the acylic one just slightly different material
the laser burns off the white leaving the brown background

[TransAmGuy]

Thank you for posting these videos Stan.Very interesting and informative . You have video's down pat

[woodman08]

shows that after a time its fairly easy to do ,and the log or diary is a great way to track what works on what material