Hi I just joined this site today .
I really like your new laser cutter . I am totally new at this and would someday like to own a cutter ,but it seems as though you need one from KERN to get something that has real quality .But am short the 80 grand lol.
I really have this thing for plexi glass and LED's and was debating to maybe pound the Visa and get one like yours . I was wondering how much you had into it .
I really want to stick with something that can cut a minimum of 3/4 inch plexi if possible so I thought a 60watt laser would be the smallest output a guy could go with .
I am in Cranbrook BC Canada,and this whole shipping from china scares the crap out of me ,but the price is sure better .Seems like anything I can find in the USA is in the 10s of thousands.
I pretty much want a cutter for my hobbies . I am building a computer desk with the computer intergrated into the desk itself ,no tower .
I am raising the liquid cooled mother board out of the one side of the corner desk with a 14 inch linear actuator ,and will be doing some custom led and plexi work .
I can cut plexi on my router table now with mdf jigs ,but how cool would it be to cut plexi with a laser.I could sure get alot more creative.
I read in one forum that a brand from the USA was not cutting a vertical cut ,more like an angle cut ,which I would not be to happy with .
Have you tried cutting 1/2 plexi with good results?
Sorry for all the questions ,but any input would be much appreciated
btw I have never used a cnc before . I have been using photoshop for a few years and thought that may help me a little