Connect Cadet CNC Lathe

[QUANTUM KEV]

Hi,

Just wanted to do a bit of a poll and see how many of these machines are knocking around.

Can I have a show of hands please of everybody that has one of these.

Once I know who has them I will know more specifically who to target my questions at

[davybfast]

hi all i have the connect lathe and mill but no software for the lathe
does any one know were i could get a copy of it many thanks davy

[MichaelHenry]

Is this lathe sold by Little Machines?

Mike

[davybfast]

hi mic

i dont think so it was made in the 90s by connect for schools

[MichaelHenry]

hi mic

i dont think so it was made in the 90s by connect for schools

Then you and/or the OP might want to try a different forum for your questions since this one is intended for machines sold by the Little Machine Shop company.

The Benchtop forum might be a good place to start or run a search on the brand name and see where other users hang out.

Mike

[antcowan]

We have one in our school here in newry, N.I. It has been gathering dust since the 90`s and i was told i need a old 386 computer to run the software.