Sieg X3 spindle noise


Results 1 to 5 of 5

Thread: Sieg X3 spindle noise

  1. #1
    Registered
    Join Date
    Sep 2010
    Location
    USA
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default Sieg X3 spindle noise

    I have been running my mill for just a few months now and suddenly a new noise appeared. A whirring noise is coming from the spindle and I don't know why. I was running it at 2800 rpm. It wasn't there yesterday, but as soon as I started up the machine today the noise started and, not knowing what caused it, I immediately turned off the machine. Any ideas are most welcome on how to fix this.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Apr 2007
    Location
    UK
    Posts
    151
    Downloads
    0
    Uploads
    0

    Default

    I had a same problem recently, take of top belt cover and adjust the belt tension, my X3 runs quiter than ever know
    Good luck
    Mike



  3. #3
    Gold Member neilw20's Avatar
    Join Date
    Jun 2007
    Location
    Australia
    Posts
    3713
    Downloads
    0
    Uploads
    0

    Default

    Belt alignment for me. I run 3600 - 2000 hours now. Puff of graphite on belt can help

    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.


  4. #4
    Registered
    Join Date
    Sep 2010
    Location
    USA
    Posts
    21
    Downloads
    0
    Uploads
    0

    Default

    Ok thanks, I will try this



  5. #5
    Registered
    Join Date
    Feb 2010
    Location
    france
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    hello brento

    i also have this kind of noise
    it came from top fan , a small smack on it
    and noise stop
    hope it helps

    herve



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Sieg X3 spindle noise
Sieg X3 spindle noise