| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| LinuxCNC (formerly EMC2) Discuss LinuxCNC (formerly EMC2) Controlers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-26-2009, 04:20 PM
| |||
| |||
Hello, I am thinking of retrofitting a machine with EMC2. I have experene with mach 3 and other cnc controls. Can I use a generic post like Fanuc 6 and EMC2 will read the g-code? Is there a list of the G and M codes supported by EMC2 so I can tweek a post to work for it? I have not really had any real problems with mach but the EMC looks like a more reliable solution, is this correct? Thanks  |
|
#2
11-26-2009, 07:05 PM
| |||
| |||
| |
|
#4
11-28-2009, 05:27 PM
| |||
| |||
| a generic fanuc post output 6 or 10 would do fine there are a few little things that you may have to edit by hand what CAM are you using? there are some post processors on the wiki site, i have made one for camworks now working on a turning post processor for emc2 also other people have made and shared some others also here http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Cam and here http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Cam_Post rob |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| EMC2 Post Processor? | jim_stoll | Dolphin CADCAM | 11 | 09-07-2009 06:43 PM |
| emc2 post processor? | cxevalo | MadCAM | 7 | 06-13-2009 02:42 PM |
| Need Help!- Creating a Post & Calling a subroutine | RyNo1966 | EdgeCam | 3 | 09-23-2008 08:24 AM |
| EMC2 Post Processor | rfrenzl | Dolphin CADCAM | 0 | 07-22-2008 10:40 AM |
| Need Help!- Editing or creating post processor in v21 | bashcan | BobCad-Cam | 0 | 03-15-2008 11:34 AM |
| | |
Linear Mode
