Need Help!- probing automaticly after M6

[alex.grojean]

hello everybody,

I have a problem with my tool length sensor.
I would like probing my new tool after each M6 of my gcode.

exemple:

N10 G71 G90
N12 G94 G54 G1 X0 Y0 Z100 F2000
N14 T1 M6
(- TOOL_CHANGE_POSITION = 1050 25 280)
(- pause for tool change with axis_manualtoolchange)
(- unpaused the prog with ( with || ))
(- probing automaticly the length tool (with G38.2)(axe Z)
N18 G17 G40 G80 G90 G94
N20 G1 X0 Y-47 Z11 F2000 S70 H01 M3
N22 X-1.518 Y-43.461 Z10.987 F1000
N24 G2 X3.406 Y-45.429 I1.478 J-3.446

for the moment all is ok but the (- probing automaticly the length tool (with G38.2)) isn't run.

actually, I divise my gcode and I probing manualy the length tool with "touch off" button(with G38.2)

do you know solution for probing automaticly after M6?

Best regads
Alex

"Ps: sorry for my english, I'm french"