| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| LinuxCNC (formerly EMC2) Discuss LinuxCNC (formerly EMC2) Controlers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-18-2008, 03:49 PM
| ||||
| ||||
I setup my MPG jogger via the paralell port which works great. Now I want to add pushbuttons for rapids, x,y,z. Just a little stuck and lost, in the command set could use some help please. I have: net remote-jog-x-plus axis.0.jog.plus <= parport.0.pin.12-in net remote-jog-x-minus axis.0.jog.minus <= paraport.0.pin.13-in but it doesnt seem to trigger or do anything. Am I doing something wrong or have to setup this function with more lines of code? -Erich Stein
__________________ WWW.RAIDGEAR.NET - FFC cables, foam headset replacement parts, and other gadgets.  |
|
#2
10-21-2008, 01:15 PM
| |||
| |||
| Her is a good tutorial on adding jog buttons http://wiki.linuxcnc.org/cgi-bin/emc...Remote_Pendant John |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need Help!- All the sudden, big problems with Rapids | SpeedsCustom | LinuxCNC (formerly EMC2) | 2 | 04-24-2008 09:44 AM |
| feed and rapids | ccmind | Syil Products | 2 | 11-20-2006 09:31 PM |
| Fadal rapids | Garypl | Fadal | 5 | 11-03-2005 02:36 PM |
| 5vdc from paralell port, not enough??? | thuffner3 | General Electronics Discussion | 8 | 11-23-2004 06:07 AM |
| Coordinates modal and / for rapids | HuFlungDung | OneCNC | 6 | 04-04-2003 09:42 PM |
| | |
Linear Mode
