EMC2 videos

[andy55]

Some recent videos of our 3-axis mill which is controlled by emc2 + m5i20 + pico-systems PWM amplifiers.

YouTube - IOM yacht keel bulb machining1

YouTube - IOM yacht keel bulb machining1

YouTube - IOM yacht keel bulb machining 3

YouTube - IOM yacht keel bulb machining 3

YouTube - IOM yacht keel bulb machining 4

YouTube - IOM yacht keel bulb machining 4

http://video.google.com/videoplay?docid=916833244018390029&hl=en
http://video.google.com/videoplay?docid=1864749796574452730&hl=en

[ynneb]

Nice

[samco]

come on now - you forgot

YouTube - M6 rigid tapping

YouTube - M6 rigid tapping

and

YouTube - M3 rigid tapping

YouTube - M3 rigid tapping

sam

[ynneb]

I am currently installing Ubuntu for a dual boot setup. I want to have a good look at where EMC2 is these days. I have only ever done a momentary live CD boot. This time I want to actually drive a machine to see its progress. Looks quite promising

[andy55]

Originally Posted by ynneb I am currently installing Ubuntu for a dual boot setup. I want to have a good look at where EMC2 is these days. I have only ever done a momentary live CD boot. This time I want to actually drive a machine to see its progress. Looks quite promising

I would say it depends very much on what hardware you have. This is my first machine with servos and encoders and I would never go back to an open-loop stepper system!
In terms of the bells and whistles for the GUI etc. EMC may still be behind some other programs but it's getting there too...

[ynneb]

I have created a new video group dedicated to EMC
http://www.youtube.com/groups_videos?name=EMCCNC
If you are an EMC user and want to add your video to the group please join the group and feel free to add it.
Regards Benny