| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| LinuxCNC (formerly EMC2) Discuss LinuxCNC (formerly EMC2) Controlers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
02-02-2008, 04:43 PM
| |||
| |||
So I decided to switch from the Pluto servo setup to a mesa 5i20 card which is working great. It was fairly easy to setup and get going. However I am trying to configure it to use a joypad so i can 'jog' XYZ axis for setup. I know that there is an example of the joypad.hal file on the EMC wiki http://wiki.linuxcnc.org/cgi-bin/emc...ur_CNC_Machine However I am not a expert in the HAL configuration and could use some help in configuring it to be setup with the Mesa Card. I would like to be able to JOG X,Y,Z axis and maybe have the feed override enabled, similar to http://www.anderswallin.net/2006/11/...emc2/#more-107 not sure if it can be done but any help would be great. thanks  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Anyone with Mesa 5I20 and 7I33 stories? | karl1 | LinuxCNC (formerly EMC2) | 15 | 12-13-2008 11:28 PM |
| Spindle Encoder to Mesa 5i20 | RogerN | LinuxCNC (formerly EMC2) | 3 | 10-17-2008 07:55 AM |
| Latest BDI with Joypad? | benedict | LinuxCNC (formerly EMC2) | 4 | 11-06-2007 11:59 AM |
| Mesa 5i20 and EMC | daedalus | LinuxCNC (formerly EMC2) | 6 | 06-27-2007 02:19 PM |
| RS232 seup problem with Meldas50 | Caboose | Machine Problems, Solutions , Wireless DNC, serial port | 19 | 03-16-2006 06:51 PM |
| | |
Linear Mode
