| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| LinuxCNC (formerly EMC2) Discuss LinuxCNC (formerly EMC2) Controlers here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-29-2006, 10:19 AM
| |||
| |||
Hello, I have a electronic conection on rorze corp I´ve the RC002 link master connected to Rc 204A I/O master connected to three RD 123 2p pulse motor drivers connected to three pacific scientific powermax II step motor,what is the better pc program to control this stuff to convert a rf30 mill to cnc mill?  |
|
#2
12-28-2006, 12:34 AM
| |||
| |||
Has anyone contacted you about this setup? I would like to know my self. I also have some what a simular setup. -Rorze RC-2044 -Rorze RC-002 -Rorze RD-123 This is my setup but from what I've read the RC-2044 on does single steps, meaning one motor at a time "not simultaniously". |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Information Req 
Linear Mode
