Need a ballscrew and ballnut - CNCzone.com-The Largest Machinist Community on the net!

trungsy · #1 10-25-2005, 09:38 AM

Hi everybody
I'm needing a ballscrew and ballnut with size: 200mm diameter about 10mm-16mm.
If you have, please sell it to me!
Thanks!

widgitmaster · #2 10-25-2005, 10:38 AM

http://www.nookindustries.com/home.cfm

trungsy · #3 10-26-2005, 02:05 AM

Have you got a secondhand ballscrew and ballnut?

widgitmaster · #4 10-26-2005, 09:12 PM

I don't think I have ever seen a ballscrew that large a diameter!
200 millimeters = 7.87401575 inches
That is massive, what is it used for?
Eric

trungsy · #5 10-28-2005, 07:21 AM

No, you are not understand my idea. I need ballscrew with diameter is 10mm to 16mm with stroke is 200mm.

widgitmaster · #6 10-28-2005, 07:40 AM

Ok, I see now...
http://www.homeshopcnc.com/page2.html
Try this site, they have screws for only $1.25 per inch, and nuts for $25
That calculates to around $35 for what you need!

They are really friendly, and will machine the ends of the screw at a reasonable cost!

Sorry, I have no used or extra ball screws
Eric

trungsy · #7 10-29-2005, 06:34 AM

Thank you very much!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)