Needing a 10-15mm wide belt, center to center distance of 92-100MM (I can shim to get over 92MM) and a pulley ratio of 3:1 or 4:1 to drive my Z axis. Drive shaft is 8mm and the screw shaft is 10mm. As long as the pulleys are 8mm or smaller, I can drill to fit if the hub is big enough. I can fabricate to include an idler pulley if necessary, but....I'm having a time finding someone who
Anyone got sources? (besides ebay and 6wks shipping)
Similar Threads:
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I buy most of my power transmission stuff from these guys. http://www.ametric.com/
SDP/SI, Misumi...
B&B gets/got the first order. Ametric's catalog wasn't working for on this machine, so they got canned for the sale.
I'm working on gearing next, 20deg PA and 16 DP just don't come from MalWart around here. Just as soon as I figure out the ratio.
Well...cancel that. The one pulley won't be in stock until sometime in June. Looks like I try another vendor later this evening.
Ebay is looking like the best bet delivery time wise.