How big is the machine?
I am designing a CNC wood cutting router for Final Year Project of university. I wish to design it from scratch but I am stuck at the dimension selection for lead screw (since as far as I know, I should start from lead screw). The question is that what ACME lead screw should I choose? What should be the TPI, Pitch, Length, Lead, and Diameter? And on what basis should I select them?
The internet says I should consider linear velocity, or feed rates, and some say weight of the assembly, and some go for torque? But I don't know any of these. I think I will start from the lead screw and then go to these specifications. HELP. Correct me if I am wrong.
Similar Threads:
How big is the machine?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)