Try disconnecting the motor, then power off, then power on the drive.
I have 4 Am882's I'm in the process of setting up one of them initially had a green led and flashing red (Wiring was wrong for nema's) but not it displays only red.
I've changed the plug and tried the plugs from the other AM882's as well as trying it's plug in them they all work flashing green this one is red.
It's not in the manual, anyone else experienced this? Am I looking at a scrap AM882.
Similar Threads:
Try disconnecting the motor, then power off, then power on the drive.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)