Problem Position following error on ACS806 + 57BL180D-1000 servo kit

Results 1 to 2 of 2

Thread: Position following error on ACS806 + 57BL180D-1000 servo kit

  1. #1
    Registered Moriduri's Avatar
    Join Date
    May 2015
    Location
    Italia
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Position following error on ACS806 + 57BL180D-1000 servo kit

    Hello, some time ago I've bought an ACS806 servo drive and a 57BL180D-1000 servo from a chinese seller on Ebay, now I'm desperately trying to tune it using Leadshine's software "ProTuner" without any success.
    I've downloaded ProTuner directly from Leadshine's website, the version I'm using is the ACS806 v.2.0 according to the manual (the drive's serial number ends with MS22B).
    The problem is that I'm not able to lower the value of the position following error, it is always way too high, considering the manual, no matter what settings I change and if the speed reaches a certain value (527 RPM in my case) then it suddenly becomes unstable and the position following error increase drastically until the drive goes into alarm state.
    I'm using a regulated 36V 400W PSU to power the system, it should be similar to the Leadshine ones.
    What I'm doing wrong?

    Thanks, Matteo.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Position following error on ACS806 + 57BL180D-1000 servo kit-position-settings-jpg   Position following error on ACS806 + 57BL180D-1000 servo kit-current-settings-jpg   Position following error on ACS806 + 57BL180D-1000 servo kit-connection-jpg   Position following error on ACS806 + 57BL180D-1000 servo kit-configs-jpg  



  2. #2
    Registered Moriduri's Avatar
    Join Date
    May 2015
    Location
    Italia
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Position following error on ACS806 + 57BL180D-1000 servo kit

    UP

    Inviato dal mio ASUS_Z00AD utilizzando Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Position following error on ACS806 + 57BL180D-1000 servo kit

Position following error on ACS806 + 57BL180D-1000 servo kit