Leadshine MX4660 Mach 3 Setting

[gcnc588]

I have a Leadshine MX4660( Leadshine Technology Co., Ltd.) and it was working good with Mach 3.
I had a motor bind up and it went into Protection Mode.
I have a single red light Flash on my X axis and a 3 red light flas on the other 3 axis.
How do I get it to reset? My Mach 3 controller software wont let me reset due to E Stop.

Similar Threads:

• Need Help!- Motors don't run - Mach3- Leadshine MX4660 - UC100 USB
• Leadshine MX4660: How does a pair of digitial outputs work?
• Need Help!- Leadshine MX4660, UC100 CNC motion controller, Mach3 and a touch probe = problem
• New Machine Build- CRP PRO 4860 and NEMA34 electronics using Leadshine MX4660 and KL34H260-60-4A

[allen2080]

Hi gcnc588,

If the red light flash one time, that means this module is over current. And if after power on, can not remove this error, then this module maybe damaged.
Try to restart the drive, if the error can not be removed. Try another new module !
Thanks.

[mousepad]

Hi ,
gcnc588 you found a solution? I also facing the problem any leads?