Leadshine technical support available on CNCzone.com - Page 2

Page 2 of 2 FirstFirst 12
Results 13 to 22 of 22

Thread: Leadshine technical support available on CNCzone.com

  1. #13
    Registered
    Join Date
    Nov 2006
    Location
    Norway
    Posts
    93
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    Quote Originally Posted by Layman94 View Post
    Hi I bought the same driver off of ebay also. If you are English speaking this may help you.

    - For the manual just go to Leadshine Technology - Home and download the manual for the ES-D508 drive. They are the same as far as I can tell and I have had no problems using it.
    - If you want to use Protuner (I tried the ES-D508 version it did not work for me) you are going to have to go to www.leisai.com. It will be necessary to have the Leadshine Technology - Home
    webpage open at the same time.
    - The leisai page is ONLY in Chinese so you will have to navigate using the leadshine.com page as a reference.
    - You will find the protuner for the HBS series version 1.3 download this. This is also ONLY in Chinese.
    - To use this you will have to get the manual for the ES-D series protuner for reference it has the same layout.

    Hope this helps.

    regards,
    layman94
    Layman94. Have you tried to use ES-D508 driver (witch is International version of HBS507), save the settings to file from english version of ProTuner just to open Chinese version of ProTuner and load the setting from the file to HBS507?

    Theoretically it schould work.

    Sent from my SM-T815 using Tapatalk

    ------
    Martin


  2. #14
    Registered
    Join Date
    Jun 2011
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    I have a Camaster cnc, Why would leadshine MX4660 drive blow from hittng the estop. This seems to be a common problem. Any fixes woul be appreciated



  3. #15
    Gold Member
    Join Date
    Mar 2008
    Location
    US
    Posts
    1655
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    hutch...
    It is well known that dc steppers generate voltage when they are moved when not under power. Numerous drives on numerous brands have blown when axes are moved by hand. Imagine the current generated if the machine was executing a rapid move of a few hundred inches per minute and the estop was activated, which of course removes power to the drives. Once the back EMF gets into the drive, it lets the magic smoke out. Blown drive.

    2 fixes: 1) Forget about the estop and use the spacebar. Too many users think that the Estop is the "everyday stop", its not, never has been. 2) Search for and find the Leadshine tech document that specs a couple $40 aluminum caps, or an even more expensive shunt to absorb the generated voltage, and install one setup.

    Gary Campbell CNC Technology & Training
    GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos


  4. #16
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    28710
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    Quote Originally Posted by islaww View Post
    2) Search for and find the Leadshine tech document that specs a couple $40 aluminum caps, or an even more expensive shunt to absorb the generated voltage, and install one setup.
    http://www.cnczone.com/forums/attach...2&d=1447075158

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #17
    Gold Member
    Join Date
    Mar 2008
    Location
    US
    Posts
    1655
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    Thanks Gerry....
    You have a mind like a steel trap!
    GC

    Gary Campbell CNC Technology & Training
    GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos


  6. #18
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    28710
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    Just decent Google skills. I'd never seen that info before.
    I was curious, so went looking for it.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #19
    Registered
    Join Date
    Nov 2006
    Location
    Italy
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    Hi ,
    I bought a 3x BLM57130-1000 and ACS306 the problem :
    do not make a complete revolution during the reverse direction (like backlash)

    I tried the ProTuner program (from Leadshine )but without result .
    (soon I will attach a video)
    Please Help!!!!
    Simone



  8. #20
    Registered
    Join Date
    Nov 2006
    Location
    Italy
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    this is the video
    is BLM57180-1000 and ACS606 same BLM57130-1000



  9. #21
    Registered
    Join Date
    Sep 2014
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    I'm trying to add a 4th axis to the MX3660 but I can't get it to work.

    Can anyone tell me what I'm doing wrong (maybe om reading the schematics wrong?)
    I have connected it like this:

    MX3660 to stepper driver:
    (Output 1+) to (DC+)
    (Output 1-) to (Pul +)
    (Output 2+) to (DC+)
    (Output 2-) to (Dir +)

    ((Pul- and Dir- to GND))

    Leadshine technical support available on CNCzone.com-mx3660d_v1-2-4th-axis-pdf



  10. #22
    Registered
    Join Date
    Jan 2015
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Re: Leadshine technical support available on CNCzone.com

    My MX4660 just stopped working all of the sudden. The LEDs ont eh drivers are dim, and flickering. Power supply is good at 36 V into the MX4660.



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Leadshine technical support available on CNCzone.com
Leadshine technical support available on CNCzone.com