Hello John
I am trying to learn to build wooden geared clocks. I have the gear g code generator you mentioned and a trial version of mach3. The smallest router
bit I can find is 1/8 inch. Every gear I enter in involute ,the program tells me
the cutter is to big. I have not been able to figure out if the information I give
the program is wrong or if there is a work around some where. Can you tell me
how you would cut a gear with-# of teeth=10,Diametral Pitch=11,Pitch Circle=
23.09,Base Diameter=22.35,Outside Diameter=27.71,Root Diameter=17.55,Tooth
Thickness=3.2,Face Rad=5.0. Any help would be much appreciated.
Thanks Alonzo