Can't believe no one would take 3 minutes to tell me how to do this.
This is what I think should be a simple project but my cnc has not arrived yet so I'm playing with the software. I want to cut several shaped items out of balsa wood. What I am using is just black silhouette clipart. I want it to cut 1/4" deep. I have Mach 3 and LazyCam software. Been using it less than an hour but not having any luck. Here's a sample image...Can you help me? Thanks, DC
Similar Threads:
Can't believe no one would take 3 minutes to tell me how to do this.
Not many people use LazyCAM, and I'm not even sure you can do what you want with LazyCAM.
I'm not real clear on what you're trying to do? Do you just want to cut around the outside of that? I don't think LazyCAM can do that.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)