Hi

I am new in LasyCam. I have new idea for a machine and i need to control it by the LasyCam software but i don't have enough information that does it possible to program it by LasyCam or not.

I need to the machine move on X axis from position 1(on x axis) to position 2(on x axis) with G1 code and at the end of position 2(on x axis) come back to the position 1(on x axis) with GO and then go to the next position, this additional movement occur on X and Y axis movement.

Does it possible for LasyCam post process automatically?


for example :

G91 G01 X100 F2000;
G0 X-100 F3000;
G01 Y200 F2000;
G0 Y-200 ;
.
.
.

I am wait for your reply.
Thank you

Similar Threads: