Need Help! lasercut 6.1


Results 1 to 2 of 2

Thread: lasercut 6.1

  1. #1
    Registered DJNPHOTO's Avatar
    Join Date
    Oct 2011
    Location
    USA
    Posts
    69
    Downloads
    4
    Uploads
    0

    Default lasercut 6.1

    I need to know what my setting are to read in the X & Y

    I have a LT-6090

    My X=900 for length one pules move length is 0.0039656251

    My Y=600 for length one pules move length is 0.0039656251 this is wrong what should it be

    per length reads 19.828125 pluse counts reads 5000

    what should i put in to make this wright
    lasercut 6.1-20170213_165542-jpglasercut 6.1-20170213_165554-jpg

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2017
    Location
    United States
    Posts
    40
    Downloads
    0
    Uploads
    0

    Default Re: lasercut 6.1

    I made a 100mm x 100mm square. Cut plywood and then measured the cut. I adjusted the numbers so the catual cut and sofware matched. You need to reset the machine after each download of settings.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

lasercut 6.1

lasercut 6.1