- Lasercut 5.3 - Check Data Options
-
Registered
Lasercut 5.3 - Check Data Options
Hey All.....great forum.
I'm a hobbyist whom purchased a 9060 laser machine and it came with lasercut 5.3 software.
The manuals available are horrible! Just not enough explanation is provided.
Hopefully some of you skills guys and gals have a better reference i could refer too.
So my dilemma. I have some images a buddy is asking me to etch into glass.......I'm using corel x5 exporting the image as .dxf, and import it into lasercut.
I run the Check Data options, and of course I have errors.
How can I repair the image with the following errors?
I have 1 x Check closed error
I have 14 x Check self-intersect errors
I have 4 Check intersect errors
I have 0 x Check overlap errors
Great............any advise on how I correct these errors?
thanks many.
Similar Threads:
-
- Lasercut 5.3 - Check Data Options
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules