Universal Laser X2-660 - Need Driver

[sanddrag]

Does anyone have the driver install for this machine? I'm switching computers and I don't have the install anymore.

[kikiorg]

I know this is an old posting, but just in case someone is searching the archives.

I had gotten a PDF of the instructions for how to download the drivers. Feel free to call them directly and confirm the instructions, but this is how I downloaded drivers for an old salvage UL cutter that a group of us are refurbishing.

First, go here: https://63.253.136.156/support

Your browser will warn you about continuing. Click "I understand the risks" to proceed. From there, go to the appropriate link to download the drivers.

Just so you know I'm not some spambot, here's a PDF I found containing the same FTP site: http://ess.myvnc.com:8928/DISK%201/U...1710%20VID.pdf

Again, feel free to confirm with UL, but this is how I downloaded my own drivers -- and I was able to "print" from Adobe Illustrator once they were installed. The machine was an old (1996) 25E machine, so they have pretty much everything there!

Kiki

[Tweakie]

Nice find Kiki - thanks for sharing.

Tweakie.