LaserCut 5.0

[edsawen]

I have lost my CD with LaserCut 5.0, anyone have it?
My e-mail: edsawen@gmail.com
I have softdog and drivers to card MPC03 but I don't have LaserCut 5.0.

[SkipW]

Originally Posted by edsawen I have lost my CD with LaserCut 5.0, anyone have it? My e-mail: edsawen@gmail.com I have softdog and drivers to card MPC03 but I don't have LaserCut 5.0.

I'm pretty sure that even if you get a copy from someone it will only work in demo mode. Each copy of LaserCut is keyed for only one softdog. Can you contact the manufacturer? If you give them the serial number of your softdog, they should be able to provide you with a working copy.

Skip

[willy1067]

Guys, i just bought a OmniSign Pro 1000 60 Watts. and it came with Laser Cut 5.
Q. are any of you using similar machine? I dont have the machine manuals.

Fernando Gomez
http://pinellas-sign-manufacturer.com/

[kewlkiwi]

Originally Posted by willy1067 Guys, i just bought a OmniSign Pro 1000 60 Watts. and it came with Laser Cut 5. Q. are any of you using similar machine? I dont have the machine manuals.

You should be able to get the manual (for LC5.0 anyway) from:

http://www.step-servo.com/english/le...ting&c=jiguang

Bob

[dandumit]

do you have any ideea who produces the LaserCut ?
They sell the software along with driver board ?

DD

[kewlkiwi]

Originally Posted by dandumit do you have any ideea who produces the LaserCut ? They sell the software along with driver board ?

I'm guessing, but I'd say it was Step Servo as it is designed to work with their driver board(s)
Bob

[Update] Yep, This page - http://www.step-servo.com/english/le...page/first.asp says it was developed by Leetro (another name for Step-Servo)

[yamingf]

Any laserCut5.0 for MPC03 software CD should work as long as you keep your USB dongle, i can get you one copy for free from supplier of laserCut and MPC03 manufacturer, shoot me an email frank.fang@ethanfang.com
Thanks
Frank

[yamingf]

have you got the software i sent to you?

[shera_cnc]

Please help I have all off equipment but i dont have soft ware. PLEASE HELP send to my email: shera@km.ru

[willy1067]

shera cnc,

Are you using OmniSign Plus pro machine? or does it go by another name?

I will try sending you a copy of what I have, but it's a large file.

[willy1067]

Where can I buy a copy of Lasercut5 w/ USB Dongle?

[kewlkiwi]

Originally Posted by willy1067 Where can I buy a copy of Lasercut5 w/ USB Dongle?

It's produced by Leetro, see:
http://www.step-servo.com/english/le...page/first.asp
But you may not be able to get V5.0 as (the last time I heard) they are up to version 5.3 at least.
There's a contact page on the above, so that might be a good place to start.

OTOH, maybe someone here has a copy to sell, complete with dongle (soft-dog)?

Bob