LaserCut 5.0 and Windows Vista?

[rayscott]

I sell chinese laser machines in the USA.. We sell Rabbit laser brand.. same brand as our main US competitor selling Chinese machine, but better than all other Chinese makers..

www. scottware.net

I am using Windows Vista from my laptop. My laptop PC is a few years old.. The Vista version is Home Premium SP1. It controls the laser machines with no problem... We always give away a free computer system with each laser machine that we sell. The computers are always Dell optiplex series with Windows XP.. It has been "rock solid".

Ray Scott
Scottware.net
3503 Carol Ann Lane
Middletown, OH 45044

check us out on the web at http://www.scottware.net

[terry32506]

Originally Posted by ArturoV I spend hours and money trying to figure out what the problems was till I figured out Vista is not compatible at all with lasercut 5.0. Hopefully later in the future (now) they come out with a solution.

If your able to connect your engraving machine through serial port connection then it will work fine with Vista or if you want another alternative you can right click on the executable, go to properties and select compatibility and change it to xp, either method works fine.

[cicigweike]

laser cut software just can be add from windows 98 to windows xp.
windows vista is in fashion and the laser cut software company is finding how to let their software compatible with windows vista now, but unfortunatelly, it can not compatible now.

Apple computer can not compatible with laser cut software too, even apple computer with windows system.

I am laser machine manufacture in china.

I hope laser cut company will solve the upwards problem in the future.

Best Regards,
Cici
song@wklaser.com
www.wklaser.com

[atelier13]

Hello! Does enyone know if I can instal my LG 900 machine on windows 7? The same thing I want to know for LaserCut. Where from can I download LaserCut 5.3 ? Thank you for answers.

[cicigweike]

Leetro company (http://www.leetro.com/english/index.htm)
had already start test lasercut software and windows 7.
their software engineer had stay at our factory from last week.

But still in testing , they can not give us a final result now.

If i know the result, i will show at this web as soon as possible.


Cici
www.wklaser.com

[atelier13]

Hello Cici,
Why I can't download from your website some kind of driver or enythig else? I need a password I think. How can I have this password? Thank you.

Cristian