| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Laser Engraving & Cutting Machines Discuss CNC Laser cutting machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
10-18-2007, 01:16 PM
| |||
| |||
I am thinking of purchasing a laser from wklasers, but before we commit to the larger machine we were thinking of trying out a smaller one just to ensure this is the right setup for us (rather than outsourcing). The small machine from wklaser is 40 watts. Would I be able to cut 1/16" black opaque ABS and 1/8" tinted acrylic on this machine? I would also like to cut 1/32" and thinner rubber (if possible).    |
|
#2
10-18-2007, 11:24 PM
| |||
| |||
| This machines are good for engraving not for cutting, you can cut slow that materials with that laser power, better if you do it with 60w or more. the rubber can be cutted but it will try to melt. Acrylic cuts very well, ABS I think will cut like polystyrene, easy. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| drilling through 1" acrylic rod over 8"lenth | jstwinbaby | General Material Machining Solutions | 3 | 12-08-2007 02:12 AM |
| Clearing out ½" deep 1" wide in Acrylic | carguy327 | Glass, Plastic and Stone | 0 | 10-04-2007 02:32 PM |
| Home Made "Junk Box" Power Supply | emtffkev | General Electronics Discussion | 11 | 04-20-2007 08:11 AM |
| Macro to read machine "power on" | jakk100 | G-Code Programing | 9 | 04-12-2007 10:15 AM |
| 24" x 24" cnc plasma table needed | mik32176 | CNC Plasma and Waterjet Machines | 13 | 08-06-2006 07:53 AM |
| | |
Linear Mode
