discusion- Max engraving speed

[lazerawy]

Hi all,
most of the Chinese machine brand will advertise that their max engraving speed between 50000 mm/min (833 mm/sec, 33 ips) and 72000 mm/min (1200 mm/sec, 47 ips)

let us know what is you machine brand and what is the max speed you can reach before it start to jump and loose position (regardless of engraving quality)

I'll start ,
brand: "Laser world" yh9060C
dvertised speed 50000 mm/min (833mm/sec)
max I can get: 650 mm/sec

please share your experience

[lamicron]

My machine is from Zhongtai, I can reach the 1000/sec but sometimes it jumps out and start to jump crazy, sometimes it depends on the drawing, I have not found yet what is the problem, in some jobs work ok , others I cannot make over 600 or 700

[bisjoe]

My U.S. made Epilog is rated 65" per second (1651 mm) and I almost always run it at 100% speed with no problems.