| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Laser Engraving & Cutting Machines Discuss CNC Laser cutting machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
09-23-2007, 01:59 PM
| |||
| |||
hello, i ufse the chinise cutter and engrave machine (RABBIT), in the manuel their is no informations about the speed and the power values for each material, like plexiglass that i use frequently, is any body have an information about this, or should i test one by one to get the optimal values, thanks for advance    |
|
#2
09-23-2007, 05:10 PM
| |||
| |||
| There is a lot of info about it in the forum, An easy way is to cut one piece of the material (12mm or thicker) PUT 90% of power, and make some cuts from the border at different speeds, starting from 60 or 70mm/sec. then you can see the diferent deep of cut in each speed, that way you can get an idea in any material. |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Where to buy materials? | Chevy-SS | General Metal Working Machines | 13 | 01-26-2009 07:36 PM |
| Importing Solidworks parts with configurations. | moldmker | BobCad-Cam | 1 | 02-04-2007 05:41 PM |
| materials | ironDigit | General Material Machining Solutions | 7 | 06-24-2006 09:43 AM |
| please tell me the wire configurations of this | shaiqbashir | Stepper Motors and Drives | 1 | 04-12-2006 04:41 PM |
| materials | broncosis | DIY-CNC Router Table Machines | 27 | 06-12-2004 08:23 PM |
| | |
Materials and configurations 
Linear Mode
