LG 900 and LC 900 your opinions please

[Micheal Donnellan]

I got a chinese vinyl cutter from a uk distributor. The electrical safety and software was ok at least on that even if I had to rethread the odd hole that got powder coated. I did not set expectations too high just to average. Its kinda a basic thing to expect the safety part to work at least.
Lasercut 50 is a pain to work with. Vinyl software was practicaly complete package in comparison. Lasercut needs a overhaul and Manual really needs a total rewrite by someone fluent in english, can't cost more than few hundred to get it proofed and corrected.

Rotarys work but I am obvisly messing up some place as a 100mm x 33mm bmp came out as a 56mm x 33mm image on a 56mm Diameter bottle.

Its 3.14*56=176
then put that in Move: section of the Pulse Unit Calculation box.
Have I messed up?

[atelier13]

Hello. I have reinstall windows XP on my computer and now I have some poblems. I can't find the CD with software for installing my LG 900 machine and LaserCut 5.1 .Can someone send me the software for my machine or tell where can I fout it to download? Thank You.

[kewlkiwi]

Originally Posted by atelier13 Hello. I have reinstall windows XP on my computer and now I have some poblems. I can't find the CD with software for installing my LG 900 machine and LaserCut 5.1 .Can someone send me the software for my machine or tell where can I fout it to download? Thank You.

In theory, http://www.step-servo.com/english/le...page/first.asp

Might not be on the English version, try the Chinese site if possible.


In practice, I've never managed to get anything useful from them.

Bob

[cicigweike]

Hi Atelier 13,
I am cici from G.weike.

I can send lasercut5.1's software to you by e-mail.
Did you lost your software dog too?
If you lost the software dog (it looks like a U disk), you should buy
a new one. the software can not work without it.

Other user whose machine have problem please not hesitate to tell me.
we will help you repair it.

Cici
www.wklaser.com
e-mail: song@wklaser.com