Chineese Laser Machines and Tubes

[Laser Doctor]

Hi Everyone:

I just found and joined this website. I have been in the laser tube business for over 25 years. I can answer any question you have about laser tubes, gasses, or power supplies. I have been to China several times and can answer your questions about these junk tubes and the money people are wasting.

Thanks.

The Laser Doctor

[svenakela]

Uhmm... I believe here are people that are pretty satisfied with their Chinese lasers too.

[Laser Doctor]

Originally Posted by svenakela Uhmm... I believe here are people that are pretty satisfied with their Chinese lasers too.

Dear Svenakela:

I do appologize. I'm sure there are good laser engravers from China. I just started with CNCZone and havn't been able to read all correspondence requarding them. The ones that I have read have been quite discouraging. I based my opion upon the threads i've read and my own personal experience with these units. My experience also has dealt directly with the chineese in this area.


The Laser Doctor

[pixpop]

Originally Posted by Laser Doctor ... junk tubes and the money people are wasting.

OK, fine. What would you recommend for someone who wants to build a machine with a CO2 laser? If something like Synrad is too expensive, and the Chinese disposable tubes are no good, is there anything in the middle?

[kyfds]

Originally Posted by pixpop OK, fine. What would you recommend for someone who wants to build a machine with a CO2 laser? If something like Synrad is too expensive, and the Chinese disposable tubes are no good, is there anything in the middle?

use my machine is ok. offer you nice quality and service.
I'm in China

[kyfds]

us my machines with my tube,~~

[technazz]

Originally Posted by kyfds us my machines with my tube,~~

He doesnt want a tube. Frankly tubes, mainly thier powers supply have a poor response time. So Engraving detailed logos at High Speed are just not the same as an ULS or EPILOG.

The Laser Generator is the important part. If you are cutting high detailed logos/photos dont get a laser tube. Try to get a RF Excited laser generator.

Chris

[kyfds]

Originally Posted by technazz He doesnt want a tube. Frankly tubes, mainly thier powers supply have a poor response time. So Engraving detailed logos at High Speed are just not the same as an ULS or EPILOG. The Laser Generator is the important part. If you are cutting high detailed logos/photos dont get a laser tube. Try to get a RF Excited laser generator. Chris

Hi! Chris! yeah,you got it. The point is the laser generator.

[Laser Doctor]

Neil:

You can have your all of your Synrad tubes refurbished @ Photovac Laser. They are located in Grove City, Ohio. They work with Synrad in cooperation with the older tube regassing. Their website is www.photovaclaser.com

The Laser Doctor

[wklaser]

Chinese lasers are junk??? Unbelievable.. Maybe some after sale service is Junk I am sure

[lazerawy]

Originally Posted by Laser Doctor Hi Everyone: I just found and joined this website. I have been in the laser tube business for over 25 years. I can answer any question you have about laser tubes, gasses, or power supplies. I have been to China several times and can answer your questions about these junk tubes and the money people are wasting. Thanks. The Laser Doctor

Hi laser Doctor, I wonder if you can recommend some material for reading about gGlass laser tube and its power supply.
I have good physics and electronis background
thanks in advance

[Tom Winters]

Originally Posted by pixpop OK, fine. What would you recommend for someone who wants to build a machine with a CO2 laser? If something like Synrad is too expensive, and the Chinese disposable tubes are no good, is there anything in the middle?

Hi pixpop. I am new to this site and i was searching forums trying to get a perception on how people veiw chinese manufactured equipment. I myself own and operate a chinese made Laser Machine. It works very well for me and i have based a business around it. I now offer the same type of machine i have, to all interested across the world. To respond to your question there is now a GREAT alternative choice in the laser tube market. Glass tubes work good and i would not neccessarly call them junk. Synrads are very expensive and it takes awhile to start making capital from the initial investment. My company now offers chinese built RF units made with parts from America. Very affordable too... 100 WATT RF unit is under $20,000.00. Interested??