Where to buy a Chinese 80W Laser

[PaioX]

Hi, I'm interested in a Chinese 1200x800 80W Laser cutter/engraver and after reading a lot of thread in this forum i've learned two things:
1-It's better if you buy a laser from a manufacturer
2-It's better if you chose a manufacturer with a good post-sales service
Now here is my question:
Who/Where can I buy it?I've read about wklaser, hkxy, G. Weike but they seems all the same, what I've to do?Please help me

[PaioX]

nobody know a good distributor/manufacturer?

[PaioX]

I've talked with Wklaser, it seem really really good

[samakthachai]

Hi Paox,
I can recommend you. I ever buy chinese laser at 60 watts of Redsail.
it's low prices but high quality. Power 60 watts is suitable for both engraver
and cutter. If you use 80 watts, It's suitable for only cutter.( cutter is good
but engrave is bad) If power is higher. beam of laser is bigger. 80 watts can
cut only non-metal. It can not cut metal. Why do you choose at 80 watts ?

[PaioX]

I think that 60W are to few to cut 10mm acrylic (or 20mm) i doesn't need to engrave photos but just simple font so i'm not interested in good engraving quality.
I doesn't know redsail products but I've seen a WKlaser and seem really good.
Did you had problems with RedSail?What about the post-sale service?

[samakthachai]

Service is good. If you have any problems with laser. He can help you.
Please contact : sara@redsailcutters.com. Redsail is manufacturer , not
distributer. I am appreciated Sara. She is good service if I have any
problems with my laser. She will find detail and help me immediately.
Hi Paiox, I want to know what job that you have to choose at 80 watts? You cut only acrylic or not.

[CNCadmin]

This outfit is great- sales @ artworldcn.com I got tubes and the quality so far is very good!

[samakthachai]

Hi Paul,
I am glad to see your post. Did you remember for your post? at
http://www.cnczone.com/forums/showthread.php?t=23815. I am interested
in Linkmotion software. You want to switch from DSP software to use this software. Can you advise me? Pls tell your e-mail to contact easily.


Regards,
Ton

[samakthachai]

Hi Paul,
I am glad to see your post. Did you remember for your post? at
http://www.cnczone.com/forums/showthread.php?t=23815. I am interested
in Linkmotion software. I want to switch from DSP software to use this software. Can you advise me? Pls tell your e-mail to contact easily.


Regards,
Ton

[PaioX]

We are in the market of serigraphy but we want to introduce the laser in our job to expand our market.
I think i will contact both Redsail and WKlaser, and evaluate the services that they offer, Redsail seem a company with more experience and a better site, but i think that the prices of wklaser are the lowest for this kind of machine. Right?

It's really difficult to do the right choose

[samakthachai]

If you buy it already. Please share idea to increase experience for laser machine at my e-mail :samakthachaip@fabrinet.co.th



Good luck PaioX
Ton

[jmg]

This outfit is great- sales @ artworldcn.com I got tubes and the quality so far is very good!

Hi Paul,

Care to share your experiences regarding artworldcn? How was the ordering and delivery? Silly question, however... is this the same outfit as the tube you showed malfunctioning? Did you purchase your power supply at artworldcn as well as the tube?

Sorry...lots of questions, but I have put my one man shop up for sale to generate funds to acquire a laser cutting machine.

Thanks,
jmg