Require: Small Laser Engraved parts cut

[ALAN2525]

I'm working on some scale models and require some small track links laser engraved and cut. I'm looking for someone based in the uk who could offer this service and then post the completed items back to me (for a reasonable cost!) The material would be 2mm acrylic and approx the size of a piece of A4 paper. The track links would need to be engraved to two depths and then each link cut out leaving a small web or sprue to keep them all on the sheet.

Can anyone offer such a service? I'm from Essex in the UK.

Anyone?

I work in Education and if you are able to do this, there may be some repeat work as often the kids require access to such a service for their GCSE project work.

Many Thanks,

Alan

[ViperTX]

Welcome....enter an RFQ...there is a section for that.

[spacer777]

hi alan, send me the design required, and quantity required, and i will see if i can help,
i am a small lasering work shop, with cutting and engraving capacity of upto 3ft x 2ft
and based in somerset,

paul