laser cutting acrylic - art application

[charper]

I have a Versa Laser at school and have cut acrlylic sheet before. But have any of you tried to cut a poured acrlyic sheeting made from dried acrlyic pastes..which has a softer tendancy. I didn't want to ruin my machine, but I want to try....

[dhana]

The Acrylic material used is very important here. Cast Acrylic is excellently suited to Laser cutting. But it is a pure risk to cut "dried acrylic paste" as the material would become milky after cutting, due to stresses released.

Dhana,
emachineshop.com - the online machineshop

[chan luci]

chip sweeper I doubt is rather imagining than telling what he sees. Not correct answer.