Where to buy Spare Parts in the USA

[pete00]

howdy
Are there any companies in the states that we can get spare parts from for lasers engravers. Like laser tubes, power supply, motors, controller etc

Or is it best just to order from manufacture over seas.
thanks...............pete

[RossMosh]

Rabbit, FSE, Hurricane, and Turnkey are the ones that I can name off the top of my head.

I'm sure there are more. I wouldn't expect them to stock everything but they stock a lot of parts. I'm not sure if any of them stock RECI tubes and power supplies, but I'm sure they will in the near future if they don't already

[JQ Laser]

Why not purchase it from RECI or the factory of laser cutting machine. you know it will effect the worklife of the laser tube if stock a long time. Usually the chinese has the connection with RECI, they will sent the tube to them when obtain the notice for produce, I think it is a good chose purchasing them from China, and the tube can be deliveryed by air. it just need serval days!
Best Regards
Casper Geng

Originally Posted by RossMosh Rabbit, FSE, Hurricane, and Turnkey are the ones that I can name off the top of my head. I'm sure there are more. I wouldn't expect them to stock everything but they stock a lot of parts. I'm not sure if any of them stock RECI tubes and power supplies, but I'm sure they will in the near future if they don't already

[RossMosh]

Originally Posted by JQ Laser Why not purchase it from RECI or the factory of laser cutting machine. you know it will effect the worklife of the laser tube if stock a long time. Usually the chinese has the connection with RECI, they will sent the tube to them when obtain the notice for produce, I think it is a good chose purchasing them from China, and the tube can be deliveryed by air. it just need serval days! Best Regards Casper Geng

The several days part is the issue. If you need your laser running tomorrow, waiting 2-3 weeks for something to arrive from China is not an option.

[JQ Laser]

Yes, but if you just need the parts, I think the days can be controled. you can obtain them by air. maybe it quickly.

Best Regards
Casper Geng

Originally Posted by RossMosh The several days part is the issue. If you need your laser running tomorrow, waiting 2-3 weeks for something to arrive from China is not an option.

[drik1009]

where are the rabbit located ？

[wktina]

dear,
i write you private message,pls check
i also send contact info of reseller in USA,you can buy directly from reseller

[drik1009]

didnot received your message

[RossMosh]

Originally Posted by JQ Laser Yes, but if you just need the parts, I think the days can be controled. you can obtain them by air. maybe it quickly. Best Regards Casper Geng

Getting a tube from China in 3 days would probably cost more than the whole machine.

[coase]

Hi
if reseller near you will be better.

[JQ Laser]

You can have a enquiry for a contrast. chose the most suitable channel.

Originally Posted by RossMosh Getting a tube from China in 3 days would probably cost more than the whole machine.

[herby08]

Hi there
just in case you did not get what you need here is a very reliable source and very affordable
Lightobject.com Sacramento (Elk Grove) DSP CO2 laser machine & Parts. Solar panel & Electronics Supplier all of Northern California marco there has super service and pretty much all you ever need
greetings
walt

Originally Posted by pete00 howdy Are there any companies in the states that we can get spare parts from for lasers engravers. Like laser tubes, power supply, motors, controller etc Or is it best just to order from manufacture over seas. thanks...............pete