| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Laser Engraving & Cutting Machines Discuss CNC Laser cutting machines here! |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
12-13-2011, 07:04 AM
| |||
| |||
Hi first time so bear with me we have a Trumph LC3030 2.6kw, serviced on a regular basis we have a error code of MFG 1 RF rev power adverge val 2300w we were told we had a possible water leak, leak test done 1.8 recorded, changed cooling block tubes replaced x8, new complete set of mirrors and lenes re leak tested new valve of .030 which seemed ok realigned mode, power starts at 3000w and slowly die down to 2300w cutting is good but decrease in power until error appears, switch of machine and restart power back up and go through process again, told may still have a water leak although leak test is ok any ideas thank you  |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie- Trumpf 3030 | carl_ray88 | Laser Engraving & Cutting Machines | 6 | 03-05-2012 06:53 PM |
| X axis 1530 versus 3030 | NGinuity | T-Slot CNC building | 2 | 09-11-2011 10:54 PM |
| TRUMPF CNC Laser 3030 3,000 Watt Good Condition L3030 | CNCadmin | EBAY ADS | 0 | 06-19-2011 09:20 PM |
| TRUMPF CNC Laser 3030 3,000 Watt Good Condition L3030 | CNCadmin | EBAY ADS | 0 | 06-06-2011 09:00 AM |
| trumph laser questions | Timothy | Laser Engraving & Cutting Machines | 0 | 08-12-2008 07:37 PM |
| | |
Linear Mode
