Problem- Moshidraw

[michael lepage]

Hello everybody,

This is translated by Google because I'm from Belgium

That is the problem, I just bought a laser machine games but when I burn with software and USB dongle I have always the same error message ERROR DATA CONVERSION.

That this person had the same problem as me and he knew how to fix it.

PS: I'm on vista


Thank you

[necrominster]

Moshidraw is a very 'buggy' program. It conflicts with
other programs, and I often have to re-install it.

It works, however, under Windows XP.

But I just tried to get it to work on a Windows Vista system and it is
giving me the Data Conversion error. If you have solved this problem,
already, please let me know. Otherwise, when I solve it, I will post my
answer here.

-- David

[michael lepage]

A big thank you David for your answer.

no I still have not found to fix this issue

even on Windows XP I am part of a serious picture.

I did everything for this to work but nothing.

I remain a solution for your listening and if I'll pass on the solution

thank you to you and yours I thank you on the wire

[necrominster]

I have asked my laser engraver supplier for the answer. I thought it might be the Vista,
and that I have to upgrade to Windows 7 Professional which uses Windows XP emulation. But you say, you have used XP, so maybe that is not the answer. I will see what my laser engraver supplier tells me.
- David

[Machado3]

Hello friends, download the last version of Moshidraw here: http://www.moshisoft.com/soft/moshidraw_left.exe and use Windows XP or Seven. Ok. Machado - Brazil.

[michael lepage]

ok a big thank you to all but the problem is not resolved even with the new version of 9.8 moshidraw

but here's a partial solution

must each time moshidraw uninstall and reinstall but for all who is over 10 cm I have still not found

This is another big thank you

[cinematic2]

DATA CONVERSION ERROR is a software problem.
You need to have clean Win XP SP2 or 3
If you have many other programs and drivers there will be a problem.
For instance I had a problem with Radio-internet driver.
Every time I am using Moshi internet must be uninstalled.

[pyrocrafter]

I use Moshidraw on Windows 7 now but also had it on Windows XP. I don't know if this is any help but mine is linked to CorelDraw and have found the DATA CONVERSION ERROR appears if I open Coreldraw first and try to export it to Moshi. I have to open Moshidraw first. I also find, if I save the drawing and then close down Moshidraw, when I re-open it, it usually works. It does conflict with other hardware devices if they are plugged in to USB ports. I had a problem getting Moshidraw to communicate with the laser engraver when I bought my Windows 7 PC. In deperation I let Windows 7 search for a driver on the internet, which it did and now it works fine. Hope this is of some help.