Problem - GCC New Mercury - CNCzone.com-The Largest Machinist Community on the net!

jm_studio · #1 05-03-2011, 04:14 PM

hello
I bay gcc laser New Mercury. If I send graphic on laser, sometimes file will do "stop-freeze" on PC printer front and I must extract USB connector and push in back and print again.
you do not know ....where is problem??
Thanks

Litografa · #2 05-04-2011, 01:09 AM

First of all do proper grounding. Unscrew any screw from laser body and with sandpaper remove paint absolutely. Buy copper wire and connect this screw to grounding contour.

jm_studio · #3 05-04-2011, 10:43 AM

Hello

Thanks for answer. I try your help but problem is always :-(

Litografa · #4 05-04-2011, 10:55 AM

Change USB cable, delete and install printer once more. What is your OS?

jm_studio · #5 05-04-2011, 11:00 AM

OS is WIN XP 32bit. Cable and delete and install printer once more.... I was trying.

Litografa · #6 05-04-2011, 11:09 AM

1) How often this happened
2) When you got this laser? If within last two months - check PM in 30 min
3) May be you can reload firmware?

This problem is unusual for Mercury

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reparación LaserPro mercury	osaro	Spanish CNCzone	5	07-08-2011 08:03 AM
Help required: Rotary engraver GCC Laserpro Mercury II	aussiemate	Laser Engraving & Cutting Machines	7	02-08-2011 07:38 AM
New Machine Build- Ted's Tsugami Mercury NCM 45 Lathe Retrofit	laserted	General Metal Working Machines	0	10-29-2009 09:43 AM
Mercury	Mercury	Composites, Exotic Metals etc	0	02-09-2009 02:34 PM
Mercury Press Brake. Where to get info & parts?	douglasco	Bending, Forging,Extrusion...	5	09-03-2008 11:49 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)