Newbie- Morntech Laser engravers?

[Blackjax]

Anyone use or have any information on how well these Morntech laser engravers are? any info would be appreciated im thinking of buying one and could use some feed back. i was thinking of buying the Rabbit line but 1100.00 for shipping 500 miles away is just a tad bit high........sure you get a free set up and 6 hours of free training oops i say free? When the Morntech is 1800 miles away and only 390.00 shipping? any feedback??

[Tweakie]

If you are buying direct from China then check your position regarding taxes etc - you may well find it costs much more than $390 before you even get to see the crate.
By comparison Ray Scott's price unpacks the crate and puts a fully working laser in your shop.

Just an observation made from reading other post over the last couple of years.

Tweakie.

[Blackjax]

Originally Posted by Tweakie If you are buying direct from China then check your position regarding taxes etc - you may well find it costs much more than $390 before you even get to see the crate. By comparison Ray Scott's price unpacks the crate and puts a fully working laser in your shop. Just an observation made from reading other post over the last couple of years. Tweakie.

390.00 is from california to iowa 1800 miles the machines are already in the states and gone through customs Morntech has a USA office so no import fees,duties or brokers.

[twehr]

Originally Posted by Blackjax 390.00 is from california to iowa 1800 miles

Where in Iowa - I am in Coralville (Iowa City area).

[Blackjax]

Originally Posted by twehr Where in Iowa - I am in Coralville (Iowa City area).

just outside of Ankeny,iowa

[twehr]

I sent you a PM.

[karlgurtler]

i don't know if you still want to know but i got my MornTech MT-L960 a few weeks ago. it had some rocky issues but the tech support from morntechusa as well as china were very helpful. it turned you that i had a bad stepper driver power supply. they shipped one out to me next day and i am up and running well. the only problem that i am suffering right now is need to find a reliable wiki for the software. it works out of the box, but i need to explore the advanced options. just to let you know, when you buy it from morntechusa.com it gets drop shipped to your door with no hidden fees.

[Blackjax]

Originally Posted by karlgurtler i don't know if you still want to know but i got my MornTech MT-L960 a few weeks ago. it had some rocky issues but the tech support from morntechusa as well as china were very helpful. it turned you that i had a bad stepper driver power supply. they shipped one out to me next day and i am up and running well. the only problem that i am suffering right now is need to find a reliable wiki for the software. it works out of the box, but i need to explore the advanced options. just to let you know, when you buy it from morntechusa.com it gets drop shipped to your door with no hidden fees.

Already bought the 100watt MTL-960 14 months ago i also bought the 60watt MTL-570 this year i also had a step driver go out on my 100watt 960 but received a replacement within 3 days from Morntech USA (no cost under warranty) and havent had any other problems with them since and plan on another machine by the end of the year happy repeat customer here!