- Laser Does Not Home
-
Registered
Laser Does Not Home
Hello,
I have attached a video showing my problem, but for those who can't see it, I will describe my issue.
Let's say I have my laser head out in the middle of my machine and the machine is on, but the lid is open. If it were working properly, when I close the lid the laser head would move all the way to the left, then to the top. This is not occurring, instead it is moving all the way to the left, then down a little bit... then down again a little bit.
It was working just fine, then this started. Any ideas?
Thanks,
Ian
P.S. This machine is a 100 watt laser from China.
<font color="#000000" style="color: rgb(0, 0, 0); background-color: rgb(250, 250, 250);">
Similar Threads:
-
-
Registered
Re: Laser Does Not Home
Are you still facing this problem?
-
Registered
Re: Laser Does Not Home
Yes, I am. I have not been able to resolve this. I have changed motherboards and limit switches. Nothing seems to fix anything.
Any ideas about my problem are welcome.
Thanks.
-
Registered
Re: Laser Does Not Home
Can you please post some pics of the limit switch and what type of probe it has on the gantry it will give me.some idea to your problem and I may be able to help you out solve this issue.
-
Registered
- Laser Does Not Home
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules