What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G


Results 1 to 2 of 2

Thread: What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G

  1. #1
    Registered
    Join Date
    Mar 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G

    I recently purchased a Chinese Laser, and the controller seams so glitchey, seams to work good then run it again and the laser goes a little haywire.

    It currently has a Leetro 6585, LaserCut 6.1

    Thinking of replacing with either Anywells AWC798C or RuiDa RDC6442G.

    Similar Threads:


  2. #2
    Registered BLshop's Avatar
    Join Date
    Nov 2016
    Location
    United States
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: What is better? Leetro 6585, Anywells AWC798C, or RuiDa RDC6442G

    What will you be processing with the laser primarily? I've used Leetro card w/ Lasercut 5.3 and it gave me quiet a few untimely 'soft dog' errors. And it happened sometimes at random. I've heard good
    things about Ruida's controllers however. A lot more stable and resistant to static interferance.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

What is better?  Leetro 6585,   Anywells AWC798C, or RuiDa RDC6442G

What is better?  Leetro 6585,   Anywells AWC798C, or RuiDa RDC6442G