Bodor and RD works Driver problem


Results 1 to 3 of 3

Thread: Bodor and RD works Driver problem

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    Sweden
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Bodor and RD works Driver problem

    Howdy,

    I´ve spent the entire day trying to get RD works to communicate with my new laser.

    I install the USB drivers accoarding to the manual but I get no connection. When I open "vendor setting" to read the setting from the machine I get the "no connected device" pop up.

    I have tryed uninstalling and reinstalling the software on three different computers, Win 7and Win10.

    In the hardware list I can only see a USB to serial device showing up.

    Any thought ?

    Similar Threads:


  2. #2
    Registered
    Join Date
    Sep 2016
    Location
    Sweden
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Bodor and RD works Driver problem

    So anyone else with this problem: I ended upp connecting over ethernet insted. instant success!



  3. #3
    Registered
    Join Date
    Sep 2012
    Location
    usa
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Bodor and RD works Driver problem

    This seems to be a common problem with Win10. Gene

    4x4 shopbot with chicom water cooled spindle
    3x4 130watt chinese laser


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Bodor and RD works Driver problem
Bodor and RD works Driver problem