CO2 laser tube beam characteristics?


Results 1 to 3 of 3

Thread: CO2 laser tube beam characteristics?

  1. #1
    Registered
    Join Date
    Apr 2012
    Location
    UK
    Posts
    4
    Downloads
    0
    Uploads
    0

    Question CO2 laser tube beam characteristics?

    Hello, I am designing a machine that will use multiple CO2 laser tubes. In order to design the optics I need some information on the characteristics of the beam generated by a CO2 laser tube. I am particularly interested in the Reci W4, although any representative tube will suffice.

    I contacted Reci for any information on beam diameter at the output coupler, beam divergence and beam profile, still waiting for a reply. I have not found any such information on EFR or SDZ either. It strikes me as something that should be available from reputable manufacturers.

    Would anyone have ballpark estimates for these parameters or any pointers?

    Best,
    Alex

    Similar Threads:


  2. #2
    Member
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    787
    Downloads
    0
    Uploads
    0

    Default Re: CO2 laser tube beam characteristics?

    You do not need this info for anything. Every f.. chinese glass laser is TEM00. If not, it is a scrap.
    Beam diameter? What the difference 5 or 7mm?
    That is all.

    CNC lasers, constructions, service


  3. #3
    Registered SPT-Laser's Avatar
    Join Date
    Aug 2016
    Location
    China
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default Re: CO2 laser tube beam characteristics?

    Hello Alex,

    You don't need such information about spot diameter, beam divergence and so on. If you laser tube is RECI W4, it's 1450mm 100w laser tube, you can use mirrors diameter 25mm and lens 20mm in your machine. The lens focal length depends the thickness of your cutting material.

    We are laser tube factory, if you have any interest to our laser tube, just contact me.

    Emily



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

CO2 laser tube beam characteristics?

CO2 laser tube beam characteristics?