- Upgrading from Lcam to StarCam
-
Member
Upgrading from Lcam to StarCam
If you are still running the older Lcam for DOS software, we can upgrade your controller to our StarCam windows controller.
We need you to ship the controller back so we can add a new windows controller board in it.
Call Larry or Lenny at Larken for more details at (800) 591 0049
Similar Threads:
-
-
Registered
Mr. Kenny;
Good morning, I have an old lcam controller board (w/the cobra stepper motors) that needs to be upgraded to the starcam system. Do i sent the complete controller unit or the board only? Should i include the reply shipping? Is the address bellow the correct one? Please advice.
thanks
claudio
Larken Automation
5350 Canotek Rd., Unit 13
Ottawa, Ontario
K1J-9E1
--
Claudio Hoyos
Mechanical Engineer
plasticoshoyos@gmail.com
Developing new and high quality products
5520 Angelus Ave.
San Gabriel, California 91776
(626)548-3688 office
(818)391-3154 cell
-
Member
Send the whole controller.
By US Mail, not courier (or there will be a customs charge).
To
Larken Automation
5350 Canotek Rd., Unit 13
Ottawa, Ontario
K1J-9E1
(613)-746 5685
What model of machine is it ?
Larry
-
Registered
reply on upgrading from lcam to starcam
Mr. Kenny;
The machine is a camtool 24/24R model pro. It has an 8" z axis clearance. I will be shipping the whole controller today via US mail.
thanks
Claudio Hoyos
Mechanical Engineer
plasticoshoyos@gmail.com
Developing new and high quality products
5520 Angelus Ave.
San Gabriel, California 91776
(626)548-3688 office
(818)391-3154 cell
-
Registered
Mr. Kenny;
Hi, has the controller arrived? It should be packed inside a computer gateway box. Please advice.
thanks
Claudio Hoyos
Mechanical Engineer
plasticoshoyos@gmail.com
Developing new and high quality products
5520 Angelus Ave.
San Gabriel, California 91776
(626)548-3688 office
(818)391-3154 cell
-
Member
Yes i got it today.
Funny they delivered it to the wrong address, since your address is 5520 something and mine is 5350 canotek, so they delivered it to 5520 canotek ??
Larry
-
Registered
Mr. Kenny;
Hi again, forgot to mention on last email on fees related to the board upgrade or the shipment return, to let me know to resolve them ahead of time. I have no problem paying the extra cost. At last, when would the equipment be ready?
Sincerely
Claudio
Claudio Hoyos
Mechanical Engineer
plasticoshoyos@gmail.com
Developing new and high quality products
5520 Angelus Ave.
San Gabriel, California 91776
(626)548-3688 office
(818)391-3154 cell
- Upgrading from Lcam to StarCam
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules